JSP 280-AHS150 MK8 Evolution Type II Hard Hat with HDPE Shell, EPS Impact Liner, 4pt Polyester Suspension and Wheel Ratchet Adjustment, Box/ 8

  .middle > * {
vertical-align:middle;
}
 
Order Size Discount
$500.00 - $1,499.99 2%
$1,500.00 - $2,999.99 4%
3,000.00 + 6%
Discount Applied at Checkout. *Some restrictions apply, click here for details.

$474.51

Price with Selected Options: 474.51

(Minimum order):

Clear
SKU: 280-AHS150
FREE SHIPPING!

Description

JSP 280-AHS150 MK8 Evolution Type II Hard Hat with HDPE Shell, EPS Impact Liner, 4pt Polyester Suspension and Wheel Ratchet Adjustment, Box/ 8

MK8 Evolution® hard hat, polyester strap suspension with impact liner, ratchet adjustment, ANSI Z89.1-2009 type 2, class G & E.

The STRONGEST Industrial Safety Helmet in the World!

Part# 280-AHS150-10 White ; 280-AHS150-20 Yellow ; 280-AHS150-50 Blue

JSP® Has Evolved Head Protection…

The MK8 Evolutionâ„¢ meets the ANSI Z89.1-2009 standard for Type II impact protection. However, it is also the only industrial safety helmet in the world meeting and exceeding the new, tougher European standard EN14052… the biggest advance in industrial head protection in over 45 years.

High impact… Side impact… Priceless Protection.
The high-density EPS liner and ultra comfortable harness ensure maximum protection in the highest risk environments, without compromising comfort.

  • 4 pt Ratchet Suspension
  • Conforms to ANSI Z89.1-2009 Type II Class E, G, & C;
  • Demands side, front & rear protection to the same level as ANSI Z89.1 Type I testing, with almost 20 times the coverage area;
  • Offers side (lateral) impact and penetration protection;
  • Expanded Polystyrene (EPS) Impact Liner helps absorb the forces of impact;
  • High-Density Polyethylene (HDPE) shell;
  • Deluxe polyester strap suspension with crown pad webbing;
  • Ratchet size adjustment for true “one size fit allâ€;
  • Universal accessory slots.
  • Available in 3 colors: White (10); Yellow (10) & Blue (50)
  • Sold by the Box/ 8

Applications:
Ideal for use in high-risk environments where high impact/side impact situations are of concern, such as construction, mining, oil & gas, demolition, high pressure jetting, energy companies and certain emergency services (FEMA & USAR).

TECHNICAL DATA:
Material: Shell: Recyclable HDPE with Expanded Polystyrene (EPS) liner; Webbing: LDPE Strap & Clips;
Harness: Polyester webbing straps & microfiber comfort padding.
Available Colors: 10 – White; 50 – Blue; 20 – Yellow; 60 – Red; 30 – Green; 80 – Orange.
Available Sizes: One size fits all
Packaging: 1 per polybag; (each helmet includes a drawstring storage pouch)

Laundering Instructions:
The unit may be cleaned with soap and warm water and dried with a soft cloth. The helmet should not be cleaned with chemical or abrasive cleaners. The helmet should be stored out of direct sunlight, away from chemicals and not exposed to extremes of temperature.

SIZES & WEIGHT:
Size available – One size
(cm) 53 – 64
(in) 207/8 – 25
Hat size 65/8 – 8
Weight 19.3 ounces / 550 grams

CONFORMITY:

Conforms to ANSI Z89.1-2009 Type II Class E

INSTRUCTIONS FOR USE:
Fit helmet on head and fasten strap to ensure correct fit. For adequate protection this helmet must be worn with the peak facing forward and be adjusted to the size of the users head.

LIMITATIONS OF USE:
Protection will only be offered if the helmet is fitted correctly. Any Helmet subjected to severe impact should be replaced immediately. Do not apply paint, solvents, adhesives or self-adhesive labels, except in accordance with instructions from the manufacturer. The harness, when in contact with the skin may cause allergic reactions to susceptible individuals. If this occurs leave the hazard area, remove the helmet and seek medical advice. The attention of users is also drawn to the dangers of modifying or removing any of the original component parts, other than as recommended by the manufacturer.

Additional information

Weight 13 lbs
Dimensions 45 × 45 × 10 cm
Color

Blue, White