Description
Titebond WeatherMaster White, Black & Clear Sealant
8 White, Black & Clear Colors to Choose From
Titebond WeatherMaster Sealant has been specifically formulated to outperform all othersealant technologies, including silicones and urethanes. This superiorpolymer formula provides the best possible performance on siding,windows, doors, roofs and vents. In addition to offering exceptionalflexibility, it provides unbeatable adhesion to wood, fiberboard,vinyl, aluminum, metal, brass and other common building materials.
WeatherMasterSealant is available in over 200 colors, all of which match today’spopular siding colors, regardless of the material or manufacturer. Iftouch-ups are necessary, it is paintable in less than one hour afterapplication.* It is waterproof, extrudes in extreme weather conditionsand is UV-resistant, making it the ideal choice for exteriorapplications. Safety is not compromised, as this sealant contains no solvents or isocyanates and is VOC-compliant.
Type  Advanced polymer (reactive) |
|
Weight/gallon 8.68 – 12.5 lbs. |
| State Medium-viscosity caulk |
|
Flashpoint> 200°F. |
| Color Over 200 colors |
|
Freeze/thaw stability Stable |
| Solids 99% (96% Translucent) |
|
Viscosity 450,000 – 550,000 cps |
| Calculated VOC (less water): 9 g/L (<3% wt.) colors, 11 g/L (<3% wt.) Crystal |
|
Storage life12 months in tightly closed containers at 75°F. |
Application temperature Above 0°F.
Service temperatures -75°F. to 300°F.
Method of application Cartridge/caulking gun
Coverage (maximum)Approximate length of bead according to bead diameter:
|
Container |
1/4″ bead | 3/8″ bead | 1/2″ bead | ||
|---|---|---|---|---|---|
| 10.1 oz. Cartridge | 31 ft. | 13.5 ft. | 7.5 ft. | ||
Tooling time For a 1/4″ bead, approximately 20-40 minutes, depending on temperature and humidity.
Working surfaces Surfacesmust be clean down to the original substrate and free from any materialthat may deter adhesion. It is the sole responsibility of the user tothoroughly test any proposed use with all substrates to determineproject suitability prior to using product on your application. Toensure neat sealant lines, mask areas adjacent to joints. Always applysealant in a bead form. Do not smear or wipe sealant to a thinconsistency outside of joint or masked area. Once sealant is dry to thetouch and does not transfer, remove masking tape. Must be painted witha water-based (latex-based) paint when used indoors.
Air,caulk and surface temperature should be above 0°F. WeatherMaster may bepainted anytime after one hour with water-based paint.* For other typesof paints, we recommend a compatibility test. If joint depth exceeds5/16″, use backing material. Not designed for continuous submersion oruse below the waterline
