Description
Sprayon Urethane and Styrene Silicone Release Agent
Item # S00315 MR 315
Uses: Polystyrenes, elastomeric materials, plastics, polyurethanes.
Sprayon® MR ™ 315 Urethane and Styrene Silicone Release Agent is a high-viscosity silicone that eliminates the common problem of chemical attacks on ultra sensitive materials. It is compatible with most moldable resins and elastomeric compounds. High purity minimizes crazing, spotting, sticking and other causes for rejection. Does not contain chlorofluorocarbons (CFC’s) or hydrochlorofluorocarbons (HCFC’s).
Uses: Polystyrenes, elastomeric materials, plastics, polyurethanes.
- Heat stable to 550ºF with low odor
- Effectively eliminates chemical attacks on ultra-sensitive materials
- Non-corrosive
- 2% Silicone
- No CFC’s or HCFC’s
- Compatible with most moldable resins and elastomeric compounds
- High-viscosity, silicone formulas for maximum releases under the most severe molding conditions
- High purity minimizes crazing, spotting, sticking and other causes for rejects
- Compatible with most moldable resins and elastomeric compounds
Performance Properties-
| Appearance: | CLEAR |
| Odor: | LIGHT SOLVENT |
| Propellant: | NON-FLAMMABLE |
| Specific Gravity: | 0.79 |
| Plastic Safe: | Y |
| HAPS: | N |
| SARA 313: | N |
| Percent VOC: | 39.54 |
| VOC Compliant (CA and OTC States): | Y |
| Flash Point: | <0 |
| Flammable: | Y |
| HMIS: | 2,2,0 |
| Fill Weight: | 12 |
| Size UOM: | oz |
| Temp Range High: | 550 |
| Activities: | 2 |
| Can Type: | Aerosol |
