Description
Sprayon S00303000 Food Grade Release Agent MR303 Aerosol 12 Oz. Cans, Case/12
Sprayon® MR303 Food Grade Release Agent Aerosol is an effective mold release for all types of materials, including wax, rubber, T.F.E., ceramics and plastics. This non-staining non-corrosive formula is effective at low and high mold temperatures. Meets FDA regulations when no more than 10 ppm is applied.
- Meets FDA Regulations
- 3% Silicone
- Non-staining, non-corrosive
- Works from 40°F to 550°F
- Also available as Sprayon® MR303 Food Grade Release Agent Bulk
Uses
Plastic injection molders, compression molders, candle holders, investment castings, extruders, blow molders, foundries and lost wax process
% Actives = 0.03%
% VOC = 0.4013%
Color = Colorless
Consistency = Liquid
Contains P.T.F.E. = No
Evaporation Rate = Fast
Film Type = Grease Like
Flammable = Yes
Flashpoint = <0°F
Food Grade Release Agents = Yes
HAPS = No
HMIS Rating = 2,2,0
Meets FDA Requirements = Yes
Plastic Safe = Yes
Propellant = Non-Flammable
SARA 313 = No
Scent = Mild Solvent
Silicone Release Agents = Yes
Specific Gravity = 0.79
Spray Pattern = Mist Spray
Temp High = 550°F
Viscosity (Centistokes) = Low
VOC COMPLIANT – OTC = Yes
% VOC = 0.4013%
Color = Colorless
Consistency = Liquid
Contains P.T.F.E. = No
Evaporation Rate = Fast
Film Type = Grease Like
Flammable = Yes
Flashpoint = <0°F
Food Grade Release Agents = Yes
HAPS = No
HMIS Rating = 2,2,0
Meets FDA Requirements = Yes
Plastic Safe = Yes
Propellant = Non-Flammable
SARA 313 = No
Scent = Mild Solvent
Silicone Release Agents = Yes
Specific Gravity = 0.79
Spray Pattern = Mist Spray
Temp High = 550°F
Viscosity (Centistokes) = Low
VOC COMPLIANT – OTC = Yes
