Titebond 3191 Self Leveling Concrete Joint Sealant – Gray 10.3 0z, Case/12

Sold by the Case 10.3 oz. Plastic Tube, 12/case 29 oz. Plastic Tube, 12/case Minimum Purchase - 2 Cases of any Titebond Product **View the Links Below**

MSDS
3191 - 10.3 oz. Cartridge
3192 - 29 oz. Cartridge
  ***COVID-19 NOTICE- RAW MATERIALS SUPPLY DELAYS*** Please Be Advised: All Titebond Products have been affected by the delay of raw materials for manufacturing.

ETA for All Titebond Orders is 8 - 10 Weeks

$77.98

SKU: 3191

Description

Titebond Self-Leveling PolyurethaneConcrete Floor Joint
2 Gray Sizes Available

Titebond Self-Leveling PolyurethaneConcrete Floor Joint Sealant is a one-component, self-leveling, premiumgrade, high performance polyurethane sealant which is specificallyengineered for contraction/expansion joints and cracks in concretedecks and floors. Designed to flow easily and smoothly into concretecracks and joints providing a permanent and durable seal. Meets orexceeds Federal Specification TT-S-00230C, Type I, Class A, ASTM C920Type S Grade P Class 25, Use T and M, CAN/CGSB-19.13-M87, Class-1-40-B-N and C-1-25-B-N.

TypeAdvanced polymer (reactive) Weight/gallon 13.85 lbs.
State Medium-viscosity caulk Flashpoint:<200°F.
Color Gray Freeze/thaw stability Stable
Solids 99% Calculated VOC (less water): 10 g/L (<4% wt.)
Viscosity 110,000 cps Storage life12 months in tightly closed containers at 75°F.

Application temperature 40°F to 100°F.
Service temperatures-75°F. to 200°F.
Method of application Cartridge/caulking gun
Coverage (maximum)Approximate length of bead according to bead diameter:

Container

1/4″ bead 3/8″ bead 1/2″ bead
10.3 oz. Cartridge 32 ft. 13.5 ft. 7.5 ft.

Tooling time For a 1/4″ bead, approximately 10 minutes, depending on temperature and humidity.
Working surfaces For best results, surfaces should be clean, dry and free from any material that may deter adhesion.
Cleanup Cleantools and excess material with mineral spirits before it dries. Scrapedried excess. Follow solvent vendor’s precautions when using solvents.

Do not apply if rain is expected within 12hours. Air, caulk and surface temperature should be above 40°F. Curetime is dependent upon ambient conditions including temperature,humidity and moisture. Typical skin time is +/- 20-45 minutes based ona temperaturee of 75°F @ 50% relative humidity. Paintable after productis tack free. For best results allow sealant to cure 48 hours beforepaintingor exposing to traffic. Store unusedproduct in dry location ator below 75°F.

Additional information

Weight 19 lbs
Dimensions 45 × 45 × 10 cm